Privacy
See your public IPv4 and IPv6 addresses, approximate location, ISP, hostname, and network details — updated from your current connection.
Updates from your current connection
Command line
curl https://skypath.cloud/api/v1/ipcurl prints the address as plain text. Add ?format=json for the full record.
Your public IP address is what websites and services see when you connect. It usually reflects your ISP or VPN exit node, not your exact street address.
This page reports the address your browser used to reach SkyPath. If your network is dual-stack, we also look for the other family (IPv4 or IPv6) via a STUN probe — not local LAN addresses.
Location shown here is approximate — based on how your IP is registered with regional internet registries, not GPS.
If you use a VPN, this page should show your VPN server's IP address and location, not your home ISP. Run it before connecting, then again after.
Your router assigns private addresses (like 192.168.x.x) to devices on your home network. Only your public IP address is visible on the open internet.
When you visit a website, it sees your public IP — the one assigned by your ISP or VPN provider.
IPv4 addresses look like 203.0.113.42 — four numbers separated by dots. IPv6 addresses are longer hexadecimal strings designed to replace the dwindling IPv4 supply.
Many connections still present only IPv4. Dual-stack networks can show both. The large address at the top is whichever version this page loaded over; the second row appears when we can confirm the other family.
The fastest way to see your public IP is this page — nothing to install. For the private address on the device itself: Windows — Command Prompt, ipconfig, then IPv4 Address. Mac — System Settings → Network → Details → TCP/IP, or run ifconfig in Terminal. Linux — ip addr or ifconfig.
iPhone: Settings → Wi-Fi → tap the info icon beside the network. Android: Settings → Network & internet → Wi-Fi → the network → Advanced. Those screens show the LAN address, not the public one websites see.
Your router's LAN address is the default gateway — usually 192.168.1.1, 192.168.0.1, or 10.0.0.1. On Windows it is the Default Gateway line in ipconfig. On Mac it is Router under TCP/IP. On phones it appears in the same Wi-Fi details screen.
Open that address in a browser to reach the router admin page. The public IP on this SkyPath page is what you share for port forwarding, game servers, or remote access — not the 192.168 address.
Load this page before you connect: you should see your ISP's IP and a location that matches your usual network. Connect SkyPath (or any VPN), refresh, and both the IP and location should match the VPN exit — not your home ISP.
If the IP does not change, traffic may not be tunneled. Follow up with the DNS leak test and the WebRTC leak test; an IP change alone does not prove DNS or WebRTC are covered.
curl /api/v1/ip returns the address as plain text. Add ?format=json for location, ISP, ASN, and hostname. Browsers always receive JSON.
Websites, apps, and advertisers can use your IP address to estimate location, link sessions, and build a profile of your activity.
A VPN replaces your visible IP with one from the VPN network, which is why checking your IP address is a quick sanity check that protection is active.
Your IP address is the unique network identifier assigned to your internet connection by your ISP or VPN. This page shows your public IP — the address websites see when you browse.
A public IP is the network address assigned to your connection by your ISP or VPN. It is how servers on the internet route responses back to you.
IP geolocation maps your address to where your ISP registered the IP block — often a city or region away from you. VPNs, mobile carriers, and corporate networks make location estimates less accurate.
Usually not. IP geolocation is typically accurate to city or region level. Exact street addresses require additional data beyond a standard IP lookup.
Many ISPs use dynamic addressing — your IP may change when you reconnect, restart your router, or switch networks. VPN IPs change when you pick a different server.
Yes. A working VPN should show the VPN server's IP and location here instead of your ISP's. If it does not, your traffic may not be tunneled. Run this page before and after you connect, then check DNS and WebRTC.
Dual-stack networks have both IPv4 and IPv6. The large result is the address used to load this page. A second row appears when we can confirm the other family. Local 192.168 or link-local addresses are not listed here — use the WebRTC leak test for those.
Run curl /api/v1/ip for plain text, or add ?format=json for the full record.
SkyPath VPN
SkyPath VPN is free for Android — one tap to connect, no account, no logs.
